Table of Contents
Advertisement
The main screen layout
•
•
•
•
•
18
Click "Configuration" at top right hand corner of
software screen.
Select the "genesig q16" tab at the left hand side of
the pop-up.
Click on the "Add" button now displayed at the
bottom of the pop-up window.
A selection of connected q16 instruments should
appear, choose the instrument you wish to connect.
If the software does not detect any unregistered
instruments, you will be prompted to manually input
the 9 digit/letter serial id no. of your q16 (this can be
found on the underside of the machine).
Advertisement
Table of Contents
