Table of Contents
Advertisement
The main screen layout
6. Standalone operation from a USB drive
In order to conduct a successful USB run, please follow
the steps below:
•
•
•
•
•
•
•
•
•
20
Setup your experiment as normal
Connect the USB stick to the PC
Click 'Start Run'
Select 'Start run from USB'
In the navigation window that appears, select the
drive associated with the USB
Wait until the 'Testing USB drive speed' pop-up
disappears
Safely remove USB drive from PC (use proper USB
eject protocol to ensure that the file 'USBRUN' has
been transferred to your USB)
Connect the USB to the q16 and the run should start
automatically . The q16 will say 'analysis starting' and
the LED light indicators will change to green.
During the run the LEDs will hold red for a several
minutes then begin cycling between red and blue until
the analysis is complete
Advertisement
Table of Contents
