Troubleshooting - Insignia NS-AC14PWH8 User Manual

Button Description
Auto Swing Press to turn on the automatic oscillation, which varies the direction of the air flow to cool the room more
efficiently.
Auto Clean Press to turn on the automatic cleaning function. When the air conditioner is off, it operates at low speed to
remove excess water from the air conditioner. This helps to prevent the growth of harmful micro-organisms.

Troubleshooting

Problem
Air conditioner does not
start
The air conditioner does
not cool
22
Possible cause
The air conditioner is
unplugged.
The fuse on the circuit is blown
or the circuit breaker is
tripped.
Power failure.
The current interrupter device
in the power cord has tripped.
Water Full lights on the
display.
Room temperature is less than
the set temperature.
Airflow is restricted.
The temperature control may
not be set correctly
The air filter is dirty.
There is a heat source or too
many people in the room.
The room may have been hot. You need to allow time for the room to cool down after you first
The exhaust hose is not
connected or is blocked.
www.insigniaproducts.com
Caution
Do not try to repair your portable air conditioner yourself. Doing
so invalidates the warranty.
Possible solution
Make sure that the air conditioner is plugged in and that the
plug is pushed completely into the outlet.
Check the house fuse/circuit breaker box and replace the fuse or
reset the circuit breaker.
If a power failure occurs, the air conditioner turns off. When the
power is restored, wait three minutes to restart the air
conditioner to prevent tripping the compressor overload.
Press the RESET button located on the power cord plug. If the
RESET button does not stay engaged, discontinue use of the air
conditioner and contact a qualified service technician.
The water collection tank is full and must be drained. Drain the
tank and reset your settings. See "Emptying the water
collection tank" on page 25.
This is normal. The air conditioner automatically shuts off when
the room temperature equals, or is less than, the set
temperature. Adjust the temperature setting, if needed.
Make sure that there are no curtains, blinds, or furniture
blocking the front of the air conditioner.
In COOL mode, decrease the temperature setting by pressing
the button on the panel or the remote control.
Clean the filter at lease every two weeks. See "Cleaning and
maintaining your air conditioner" on page 24.
Move any heat sources from the room.
turn on the air conditioner.
Connect the exhaust hose and make sure that it is not
obstructed and is functioning properly.
NS-AC14PWH8