Download Print this page

Troubleshooting; Specifications; Inserting The Batteries In The Remote Control; Setting A Timer - Insignia NS-AC10PWH8 Quick Setup Manual

10,000 / 12,000 btu portable air conditioner
Hide thumbs Also See for NS-AC10PWH8:

Advertisement

Remote control
#
ITEM
1
Speed settings
2
Swing
3
Timer
(Up) and (Down)
4
buttons
5
Cool
6
Dry
7
Fan
8
Auto
9
°C / °F
10
Power
SETTING UP YOUR PORTABLE AIR CONDITIONER
Before using your portable air conditioner
• Remove and store (optional) packing materials for reuse.
• Remove any shipping tape before using the air conditioner.
• Remove tape residue with liquid dish soap and a damp cloth.
Do not use sharp tools, alcohol, thinners, or abrasive cleaners to
remove adhesive, which could damage the finish.
Placing your air conditioner
• Place the unit on a flat, dry area near a window, so you can use
the hose and diffuser to connect the air conditioner to the
20 in. (50 cm)
window installation kit in order to vent the exhaust air outside.
• To maintain good air circulation and optimum machine
performance, leave a 20 in. (50 cm) space around it.
INSTALLING YOUR AIR CONDITIONER
1 Screw the exhaust hose to the air outlet on the back of your
air conditioner, then screw the hose adapter to the other
end of the hose.
DESCRIPTION
Press to select the high, mid, or low setting.
Press to turn the swing function on or off.
Press to set the air conditioner to turn on or off
automatically.
COOLING mode: Press to raise () or lower ()
the temperature setting.
2 Measure the window size.
TIMER mode: Press to turn the timer on () or
off ().
Press to set the air conditioner to cooling mode.
Press to set the air conditioner to DRY mode.
Press to turn on the air conditioner fan only
(no cooling).
Press to set the air conditioner to AUTO mode.
Press to switch between Fahrenheit and Celsius.
3 Adjust the length of the window sealing plate to fit the
Press to turn the air conditioner on or off.
window opening.
4 Install the window sealing plate in the window opening
and secure it with the screws provided.
20 in. (50 cm)
5 Insert the hose adapter into the vent panel, then slide it
down or left until it clicks into place.
Small gap
First insert
Second slide
OR
• For optimum performance, do not twist the venting hose.
For better efficiency, shorten the hose, if possible.
Caution: The exhaust duct is designed especially for this air
conditioner. Replacing or lengthening the duct could result in
damage to your unit.
6 If desired, install the security bracket with the type C screw.
Type C screw
Security bracket
Running your air conditioner in DRY mode

TROUBLESHOOTING

If you want to continuously drain the water from your air
For troubleshooting information see your online User Guide.
conditioner and never have to manually drain the collection
tank, see your online User Guide.

SPECIFICATIONS

For specifications see your online User Guide.
USING YOUR PORTABLE AIR CONDITIONER

Inserting the batteries in the remote control

ONE-YEAR LIMITED WARRANTY
• Insert two AAA batteries (provided) into the remote control.
Visit www.insigniaproducts.com for details or see your online
User Guide.
CONTACT INSIGNIA:
For customer service, call 1-877-467-4289 (U.S. and Canada)
Make sure that you orient the
or 01-800-926-3000 (Mexico)
batteries correctly (+ and –)
www.insigniaproducts.com
when you install them.
INSIGNIA is a trademark of Best Buy and its affiliated companies
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richfield, MN 55423 U.S.A.
©2016 Best Buy. All rights reserved.
Made in China
TURNING YOUR AIR CONDITIONER ON AND
SELECTING THE MODE
1 Press Power ( ) to turn your air conditioner on.
2 Press Mode ( ) to select Cool, Fan, Dry, or Auto.
• In Cool or Fan modes, press Fan ( ) to set the fan speed.
• In Cool or Dry modes, press  or  to set the
temperature.
• In Auto mode, the air conditioner function is determined
by the ambient temperature. If the temperature is higher
than 77° F (25° C), the air conditioner runs in cooling
mode. If lower than 77° F (25° C), the air conditioner runs
in fan mode.
Switching between Fahrenheit and Celsius
• Press °C / °F on the remote control.

Setting a timer

Set your air conditioner to turn off or turn on after a delay of up
to 24 hours.
• Automatic off: Press  or  while the air conditioner is
running.
• Automatic on: Press  or  while the air conditioner is off.
See your online User Guide for more information on using your
air conditioner.
V2 ENGLISH 17-0297

Advertisement

loading

This manual is also suitable for:

Ns-ac12pwh8