Removing The Hard Disk Drive - Clevo N240PU Service Manual

Disassembly

Removing the Hard Disk Drive

Figure 2
HDD Assembly
The hard disk drive can be taken out to accommodate other 2.5" serial (SATA) hard disk drives with a height of 7.0mm
Removal
(h). Follow your operating system's installation instructions, and install all necessary drivers and utilities (as outlined in
Chapter 4 of the User's Manual) when setting up a new hard disk.
a. Remove the screws.
b. Remove the bottom
Hard Disk Upgrade Process
cover.
c. Locate the HDD assem-
1. Turn off the computer, turn it over to remove the battery
bly.
2. Remove the SD card cover
3. Lift the bottom cover
4. The hard disk drive will be visible at point

a.
HDD System Warning
New HDD's are blank.
Before you begin make
sure:
1
You have backed up
any data you want to
keep from your old
HDD.
You have all the CD-
ROMs and FDDs re-
quired to install your op-
erating system and
programs.
If you have access to
the internet, download
the latest application
and hardware driver up-
1. SD Card Cover
dates for the operating
system you plan to in- 17. Bottom Cover
stall. Copy these to a re-
movable medium. • 15 Screws
2 - 6 Removing the Hard Disk Drive
and screws
1
up from point
17 18
5
3
4
2
16
13
14
15
12
11
10
9

(page 2 - 5).
- (Figure 2a).
2 16
(Figure 2b).
(Figure 2c ) .
19
b.
6
18
7
8
c.
19
17