Water Hazard Led - Standard Horizon HX870E Owner's Manual

12.6.2 Water Hazard LED

1. Press the MENU key to display "MENU".
2. Select "SETUP" with the CH▼/CH▲/◄/►
key, then press the [SELECT] soft key.
3. Select "CONFIGURATION" with the CH▼/
CH▲ key, then press the [SELECT] soft key.
4. Select "STROBE LED" with the CH▼/CH▲
key, then press the [SELECT] soft key.
5. Press the CH▼/CH▲ key to select "WATER
HAZARD LED", then press the [SELECT] soft
key.
6. Press the CH▼/CH▲ key to select the
desired setting. You can select one from
"OFF", "ON", or "ON/PWR ON".
OFF:
ON:
ON/PWR ON: The LED lights up and the
7. Press the [ENTER] soft key to store the selected setting.
8. Press the CLR key to return to radio operation.
Page 94
The LED does not light up.
The LED lights up.
transceiver turns on even if the
transceiver is off.
GM SETUP
WAYPOINT SETUP
CH SETUP
GPS SETUP
CONFIGURATION
ATIS SETUP
DIMMER
CONFIGURATION
LAMP
CONTRAST
BACK
KEY BEEP
BATTERY SAVE
STROBE LED
SOFT KEY
BACK SELECT WATER HAZARD LED
CONFIGURATION
WATER HAZARD LED
OFF
BACK
ON
ON/PWR ON
BACK SELECT
SETUP
SELECT
CONFIGURATION
STROBE LED
EMERGENCY LED
SELECT
HX870E