Advertisement
Clean the Nozzle
WARNING
To reduce the risk of fire, electric shock or injury, turn power OFF and disconnect from
charger before performing maintenance or troubleshooting.
1
The front nozzle of the unit removes for easy
cleaning of dirt and debris. Remove the clean water
tank and locate the latch at the top of the nozzle.
Pull tab and rotate back to separate from unit.
3
If necessary, wipe with a clean
cloth or soft bristle brush.
4
click
Replace the front nozzle by hooking lower edge
onto unit and snapping into place. Then place the
clean tank back on the unit.
2
Rinse nozzle with clean
water and check spray
nozzle for dirt or debris.
www.BISSELL.com
click
11
Advertisement
