Advertisement
Empty Dirty Water Tank
WARNING
To reduce the risk of fire, electric shock or injury, turn power OFF and disconnect from
charger before performing maintenance or troubleshooting.
1
Ensure the unit is OFF and set upright
on a flat surface. Simply push up on the
release button located on the top of the
tank to remove.
3
Rinse out the dirty tank with clean water
after emptying.
NOTICE: To reduce the risk of a leaking condition, do not store where freezing
may occur. Damage to internal components may result.
10
www.BISSELL.com
2
Carefully remove the dirty water tank from
the unit and carry to a sink. To prevent
spills, hold tank vertically after removing.
To empty, pull tab at the end of the tank
and empty to remove the dirty water.
4
Close the tank plug
and return tank to
the unit. Ensure
the tank is secure
before use.
click
Advertisement
