Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Bissell 2066 Series
Summary of Contents for Bissell 2066 Series
- Page 1 PROHEAT 2X ® REVOLUTION ™ PET PRO _______________ USER GUIDE 2066 SERIES...
-
Page 2: Safety Instructions
13 amp (ASTA approved to BS 1362) fuse is fitted in the » Keep hair, loose clothing, fingers, and all parts of carrier contained in the plug. Spares may be obtained from your BISSELL body away from openings and moving parts of supplier. -
Page 3: Quick Start Guide
Use a Philips screwdriver Wrap the cord around clean water tank with to secure the screw (found the carry handle and Quick the grooves and slide taped to upper handle) Release™ Cord Wrap hook. the tank into place. into the carry handle. www.BISSELL.com... -
Page 4: Table Of Contents
Thanks for buying a BISSELL carpet cleaner! We love to clean and we’re excited to share one of our innovative products with you. We want to make sure your carpet cleaner works as well as it does today for years to come, so this guide has tips on using (pages 7-12), maintaining (pages 13-17), and if there’s a problem, troubleshooting (page 18). - Page 5 Switch Spray Trigger Rubber CleanShot® Formula Cap Quick Button Release™ Cord Wrap Clean Water Tank Belt (3.7 Liter Capacity) Access Door Recline Pedal EdgeSweep® Power Brushes Button Float Dirty Water Tank Stack Foot Belt Access Belt/Brush Access Plate Nozzle www.BISSELL.com...
-
Page 6: Cleaning Formulas
Protector Protector Technology ONLY BISSELL Wash & Protect formulas protect from future stains with Scotchgard™ Protector. Scotchgard™ is a trademark of 3M®. *60 mL of 2X concentrated formula is equivalent to 120 mL of non-concentrated formula. Tips Before Carpet Cleaning •... - Page 7 NOTE: Fill with hot (140°F/60°C MAX) tap water and add the appropriate BISSELL solution. DO NOT USE BOILING WATER. DO NOT HEAT WATER OR TANK IN MICROWAVE. Do not substitute BISSELL Cleaning Formula with other household cleaning products.
- Page 8 NOTE: In Express Clean Mode, the clean with your machine in Deep Clean dirty tank will not get as full as when Mode. cleaning with Deep Clean Mode. NOTICE: To prevent damage to Berber carpets, avoid repeated strokes in the same area. www.BISSELL.com...
- Page 9 WARNING: To reduce the risk of fire and electric shock when cleaning a hard floor, the BISSELL bare floor tool must be used and is only to be used with BISSELL Wash & Shine Hard Floor Cleaner formula intended for use with this appliance.
- Page 10 NOTE: If using the Deep Reach Tool (select models only) or Pet Stain Tool (select models only) be sure the needles of the tool are pressed down into the carpet so the spray gets into the carpet fibers. www.BISSELL.com...
- Page 11 “I” symbol when it is on. symbol when it is off. Completely cover the stain with CleanShot® spray. Allow the stain to soak. To extract, maneuver the foot of the machine over the stain to brush and remove. www.BISSELL.com...
- Page 12 WET MODE NOTE: Start from the area farthest away. Hold the trigger down, and pull the tool toward you. Keep the tool in contact with the surface as you pull. You will see extraction through the nozzle. www.BISSELL.com...
-
Page 13: Troubleshooting
Did You Know? aligned, the float stack should lock into place. The Float Stack is what prevents Return the ring and your dirty twist to lock. Water tank from may leak if the ring is not fully tightened. overflowing. www.BISSELL.com... -
Page 14: Www.bissell.com
Store machine in a Twist cap back on tightly. protected dry area. NOTICE: To reduce the risk of a leaking condition, do not store unit where freezing may occur. Damage to internal components may result. www.BISSELL.com... - Page 15 Ensure the nozzle wire on the front of the brush roll cover has also snapped back into place. Line up the nozzle from the edge near the floor and rotate to snap back into place. click www.BISSELL.com...
- Page 16 There are washers Use a flathead at the ends of the screwdriver and brush rolls, be press it into careful that these the Belt Access do not fall off or Door slot. Lift to get lost. remove the Belt Access Door. www.BISSELL.com...
- Page 17 Slide the wheel up back into the slot and Snap the Belt Access Door back secure with the screw that was removed. down into place. NOTE: See Step 7 on page 15 for how to put the brush roll cover and nozzle back in place. www.BISSELL.com...
- Page 18 2. With the cap twisted ON tightly, hold your tank at an angle, over a tank and the tank’s handle sink or drain, so any extra water can pour out of the space 3. Wipe the tank dry with a cloth www.BISSELL.com...
- Page 19 Notes www.BISSELL.com...
-
Page 20: Service
BISSELL Consumer Care or contact your local distributor. BISSELL DOES NOT EXCLUDE OR LIMIT IN ANY WAY ITS LIABILITY FOR (A) DEATH OR PERSONAL INJURY CAUSED BY OUR NEGLIGENCE OR THE This Guarantee is given to the original purchaser of the product from NEGLIGENCE OF OUR EMPLOYEES, AGENTS OR SUBCONTRACTORS;...
Need help?
Do you have a question about the 2066 Series and is the answer not in the manual?
Questions and answers