Advertisement
Advertisement
Table of Contents
Related Manuals for Bissell SPINWAVE 2307
Summary of Contents for Bissell SPINWAVE 2307
- Page 1 SPINWAVE ® CORDLESS _______________ USER GUIDE 2307, 2315 SERIES...
-
Page 2: Important Safety Instructions
» Do not charge with damaged cord » Use only BISSELL cleaning temperature. Exposure to fire or or plug. If appliance is not working formulas intended for use with temperature above 130°C or 265°F... -
Page 3: What's In The Box
Thanks for buying a BISSELL® SpinWave® Cordless We love to clean and we’re excited to share one of our innovative products with you. We want to make sure your hard surface floor cleaner works as well as it does today for years to come, so this guide has tips on using, maintaining, and if there’s a problem, troubleshooting. - Page 4 Charging Adapter Plug Storage Tray 10 Carry Handle Charging Port Assembly WARNING Do not plug in your SpinWave® Cordless until you are familiar with all instructions and operating procedures. Insert handle into body of unit until you hear a “click”. click www.BISSELL.com...
-
Page 5: Charging The Battery
Cleaning Formulas WARNING To reduce the risk of fire and electric shock due to internal component damage, use only BISSELL cleaning formulas intended for use with the hard floor device. SPINWAVE® CORDLESS FORMULAS Keep plenty of SpinWave® Cordless formulas on hand so... - Page 6 WARNING Overcharging may cause battery damage, fire or explosion. Your BISSELL® SpinWave® Cordless machine has an LED light display that will turn on when the power key is pushed to show the battery life status. All LED color is blue.
- Page 7 Attaching Mop Pads: Option 1 Your BISSELL® SpinWave® Cordless may The Soft Touch Pad is for everyday have come with two different mop pads: use on delicate flooring like sealed hardwoods and laminate. The Scrubby Pad is used to power through tough, sticky messes.
- Page 8 Attaching Mop Pads: Option 2 Your BISSELL® SpinWave® Cordless may The Soft Touch Pad is best for have come with two different mop pads: everyday use on delicate flooring like sealed hardwoods and laminate. The Scrubby Pad is best used to power through tough, sticky messes.
- Page 9 A few notes about filling the Clean Water Tank: • Fill with warm (140°F/60°C MAX) tap water and add the appropriate BISSELL solution. DO NOT USE BOILING WATER. DO NOT HEAT WATER OR TANK IN MICROWAVE. www.BISSELL.com...
- Page 10 Care should be taken to not overwet the floor surface, especially when cleaning wood and other delicate floor surfaces. TIP 4: When cleaning near baseboards, edges or furniture you may feel a slight pull from the unit due to bouncing off the surface. www.BISSELL.com...
- Page 11 10 seconds of no action. You will know it is off when the LED lights are no longer illuminated. To power OFF the unit, press the unit ON/OFF button and put unit into upright position. The LED lights will turn off. www.BISSELL.com...
- Page 12 NOTE: Any solution remaining in the Clean Water Tank should be emptied prior to machine storage. NOTE: Store cleaner in a protected, dry area. Since this product uses water, it must not be stored where there is danger of freezing. Freezing may damage internal components and void the warranty. www.BISSELL.com...
- Page 13 NOTE: Keep Battery Pack together – DO NOT separate individual batteries. For specific disposal instructions of batteries, please contact the RBRC (Rechargeable Battery Recycling Corporation) at 1-800-822-8837 or visit www.Call2Recycle.org. www.BISSELL.com...
-
Page 14: Troubleshooting
Press power button on handle one time flashing cause internal temperature of and wait for unit to cool down and machine to warm up slightly reset. past the typical operating temperature. Two (2) LED Functional issue with machine. Contact us for additional assistance. lights flashing www.BISSELL.com... -
Page 15: Warranty
Service If your BISSELL product should require service: Contact BISSELL Consumer Care to locate a BISSELL Authorized Service Center in your area. If you need information about repairs or replacement parts, or if you have questions about your warranty, contact BISSELL Consumer Care. - Page 16 NOTE: Please keep your original sales receipt. It provides proof of purchase date in the event of a warranty claim. See Warranty page for details. Parts & Supplies For Parts and Supplies, go to www.BISSELL.com and enter your model number in the search field. We can’t wait to hear from you!
Need help?
Do you have a question about the SPINWAVE 2307 and is the answer not in the manual?
Questions and answers
Can the battery be replaced
Yes, the battery in the Bissell SPINWAVE 2307 can be disconnected from the control board, indicating it is replaceable. However, the battery pack should be kept together and not separated into individual batteries.
This answer is automatically generated