Sony DVS-9000 User Manual page 152

With ccp-8000 series center control panel

Hide thumbs Also See for DVS-9000:

Table of Contents

This transition type is not available for an independent key transition.

In this dissolve, the current video is maintained at 100% output for the first half

of the transition as the new video is mixed while increasing progressively to

100%, then the current video is progressively reduced from 100% to zero in the

second half with the new video maintained at 100% output.

For details on super mix settings, see page 163.

This transition type is not available for an independent key transition.

Preset color mix

This is a two-stage dissolve, comprising two transitions, the first a dissolve to

a color matte, and the second from the color matte to the new video.

In the first transition, the current video is replaced by the color matte in a mix

(dissolve), then in the second transition the color matte is replaced by the new

video also in a mix (dissolve).

For details on color matte settings, see page 164.

This transition type is not available for an independent key transition.

A wipe replaces the current video by the new video according to a

predetermined pattern. This transition type can also be selected for an

independent key transition.

For details, see "Wipes" (page 35) and Chapter 5 "Wipes" (page 265).

Using a DME effect, it is possible to obtain a transition to a new image from

the current image, as in a wipe. You can also use this transition type as an

independent key transition.