Listening To A Cd; System Connections; Listening To The Radio - Sharp XL-1000H Service Manual

1 1
Accessories
(For Europe) (For U.K.)
AC power lead × 1 Remote control × 1
FM aerial × 1 Speaker wire × 2
2 2
Battery installation of remote control
Use 2 "AAA" size batteries (UM-4, R03, HP-16 or similar).
Batteries are not included.
Remove the Insert the batteries
1 2
battery cover. as shown.
3 3

System connections

MD recorder
FM aerial
To the optical line
input socket
AM loop aerial
Connection cable
for digital recording
(not supplied)
Right speaker
Headphones
AM loop aerial × 1
(For Europe only)
"AAA" size battery (UM-4,
R03, HP-16 or similar) × 2
Replace the cover.
3
TV
VCR, DVD, etc.
To the line
output socket
RCA lead
(not supplied)
Left speaker
Wall socket
(AC 230 V, 50 Hz)
(For U.K.)
(For Europe)
Right speaker Left speaker
White line
Black
4
4
Turn on your system
Press the ON/STAND-BY button to turn the power on.

Listening to a CD

Press the FUNCTION button until "CD STOP" or "NO DISC" appears on
1
the display.
Press the 7 7 7 7 7 button to open the CD compartment.
2
Place a CD on the spindle, label side up.
3
Press the 7 7 7 7 7 button to close the CD compartment.
4
Total number of tracks
Press the 06
5

Listening to the radio

Press the FUNCTION button until "FM" or "AM" appears on the display.
1
Press the TUNING (X X X X X or W W W W W ) button to tune in to the desired station.
2
When the TUNING button is pressed for more than 0.5 seconds, scanning will start auto-
matically and the tuner will stop at the first receivable broadcast station.
To receive an FM stereo transmission:
3
Press the FUNCTION button to display the
"ST" indicator.
" " will appear when an FM broadcast is in stereo.
j
If trouble occurs
When this product is subjected to strong external interference (mechanical shock, excessive static electricity,
abnormal supply voltage due to lightning, etc.) or if it is operated incorrectly, it may malfunction.
If such a problem occurs, do the following:
1. Set the unit to the stand-by mode and turn the power on again.
2. If the unit is not restored in step 1, unplug and plug in the unit, and then turn the power on.
3. If neither step 1 nor 2 restores the unit, do the following:
¡ Press the ON/STAND-BY button to enter the power stand-by mode.
™ Unplug the AC power lead from the AC INPUT socket on the unit.
œ Whilst pressing down the MEMORY/SET button and the J button, plug the AC power lead into the AC
INPUT socket on the unit.
Maintenance
Do not touch the laser pickup lens. If fingerprints or dust accumulate on
the pickup, clean it gently with a dry cotton swab.
– 7 –
XL-1000H/1100H
12 cm (5")
8 cm (3")
Total playing time
06 button to start playback from track 1.
06 06
06
FM stereo mode indicator
FM stereo receiving indicator
AC INPUT