Installation; System Requirements; Hardware Description - Philips CPWBS154 Instructions For Use Manual

Installation

System Requirements

• ADSL line installed by your Internet Service Provider.
• A computer using a fixed IP address or dynamic IP address assigned via
DHCP, as well as a gateway server address and DNS server address from
your service provider.
• A computer equipped with a 10/100 Mbps network adapter, a USB-to-
Ethernet converter or an IEEE 802.11g wireless network adapter.
• TCP/IP network protocols installed on each PC that will access the Internet.
• A Java-enabled web browser, such as Microsoft Internet Explorer 5.5 or
above or Netscape 4.7 or above, installed on one PC at your site for
configuring the ADSL Wireless Base Station.

Hardware Description

The ADSL Wireless Base Station contains an integrated ADSL modem and
connects to the Internet or to a remote site using its RJ-11 WAN port. It
can be connected directly to your PC or to a local area network using any
of the four 10/100 Ethernet LAN ports.
Data passing between devices connected to your local area network can
run at up to 100 Mbps over the 10/100 Ethernet ports and 54 Mbps over
the built-in wireless network adapter.
The ADSL Wireless Base Station includes an LED display on the front panel
for system power and port indications that simplifies installation and network
troubleshooting. It also provides the following ports on the rear panel:
1 ADSL Port
WAN port (RJ-11). Connect your ADSL line to this port.
2 Power Inlet
Connect the included power adapter to this inlet.
Warning: Using the wrong type of power adapter may damage the
ADSL Wireless Base Station.
3 Reset Button
Use this button to reset the power and restore the default factory
settings.To reset without losing configuration settings, see 'Reset' on page
54-55.
4 Power button
Press this button to turn on/turn off the ADSL Wireless Base Station.
5 LAN Ports
10/100 Ethernet ports (RJ-45). Connect devices on your local area
network to these ports (i.e., a PC, hub, or switch).
ADSL POWER RESET LAN1 LAN2 LAN3
1 2 3 4 5
ENGLISH
LAN4
7