ASROCK X299 GAMING i9 User Manual page 78

RAS# to CAS# Delay (tRCD)
RAS# to CAS# Delay : The number of clock cycles required between the opening of a row
of memory and accessing columns within it.
Row Precharge (tRP)
Row Precharge: The number of clock cycles required between the issuing of the precharge
command and opening the next row.
RAS# Active Time (tRAS)
The number of clock cycles required between a bank active command and issuing the
precharge command.
Command Rate (CR)
The delay between when a memory chip is selected and when the first active command can
be issued.
Secondary Timing
Write Recovery Time (tWR)
The amount of delay that must elapse after the completion of a valid write operation,
before an active bank can be precharged.
Refresh Cycle Time (tRFC)
The number of clocks from a Refresh command until the first Activate command to
the same rank.
RAS to RAS Delay (tRRD)
The number of clocks between two rows activated in different banks of the same
rank.
RAS to RAS Delay (tRRD_L)
The number of clocks between two rows activated in different banks of the same
rank.
Write to Read Delay (tWTR)
The number of clocks between the last valid write operation and the next read command to
the same internal bank.
Write to Read Delay (tWTR_L)
The number of clocks between the last valid write operation and the next read command to
the same internal bank.
70