Basic Functions; Switching On, Switching To Standby; Demonstration Mode - Philips WIRELESS PC LINK MICRO MCW770 Custom Installation

Basic functions

Switching on, switching to
standby
CD TUNER
CD 1
CD 4
To switch the unit to an active mode
press one of the source keys on the remote
control (CD,TUNER, AUX, PC LINK)
or
select a source by pressing SOURCE on the
unit repeatedly until CD, TUNER or AUX is
displayed,
or
select the PC as source by pressing
PC LINK A on the unit.
To switch the unit to standby press
and hold STANDBY-ON 2 for more than
2 seconds.
The clock is displayed.
To switch the unit to Eco Power
standby press STANDBY-ON 2.
20
AUX PC LINK
CD 3
CD 2
CD 5
VOL
ALBUM
BROWSE

Demonstration mode

The demonstration mode displays various
features of the unit.
To activate the demonstration mode
press and hold STOP DEMO
5 seconds during standby or Eco Power
standby on the unit until DEMO ON is
displayed.
To deactivate the demonstration
mode press and hold STOP DEMO
again on the unit for 5 seconds until
DEMO OFF is displayed.
Ç
for
Ç