Activating Or Deactivating The Timer; Checking The Timer Setting; Sleep Timer - Philips WIRELESS PC LINK MICRO MCW770 Custom Installation

Activating or deactivating the timer

REPEAT PROGRAM
SLEEP CLOCK
RDS/NEWS DIM
Press TIMER ON/OFF on the remote
control repeatedly to activate or deactivate
the timer.
TIMER ON, the last set source and start
time are displayed and the timer is
activated.
TIMER OFF is displayed and the timer is
deactivated.

Checking the timer setting

REPEAT PROGRAM
SLEEP CLOCK
RDS/NEWS DIM
Press for less than 2 seconds TIMER on the
remote control to check the timer setting.
TIMER ON, the last set source and start
time are displayed.
SHUFFLE DISPLAY
TIMER TIMER ON/OFF
DSC VEC
SHUFFLE DISPLAY
TIMER TIMER ON/OFF
DSC VEC

Sleep timer

You can set a certain period of time after
which the unit will switch to standby.
REPEAT PROGRAM
SLEEP CLOCK
RDS/NEWS DIM
1
Press SLEEP on the remote control
repeatedly to select the desired period of
time (in minutes). Selection as follows:
15MIN,
SLEEP SLEEP
45MIN, 60MIN,
SLEEP
120MIN, SLEEP OFF.
SLEEP
2
As soon as the desired period of time is
displayed, do not press SLEEP again.
During the last 10 seconds before
switching to standby a countdown is
displayed: SLEEP 10, SLEEP 9,...
SLEEP 1, SLEEP.
Then the unit switches to standby.
To deactivate the sleep timer press SLEEP
on the remote control until SLEEP OFF is
displayed or press STANDBY-ON 2.
Timer
SHUFFLE DISPLAY
TIMER TIMER ON/OFF
DSC VEC
30MIN,
SLEEP
90MIN,
SLEEP
31