Am3610 Reassembly Procedure - Acer Aspire AM5610 Service Manual

AM3610 Reassembly Procedure

1. Insert the system power supply in to the chassis and secure the four screws marked below.
IMPORTANT:FSP and LITEON power supply cabling differ due to size constraints. For FSP power supplies,
use a power cable clip to secure the 12V cable. For LITEON power supplies, use a non-cable clip to
secure the 12V cable.
FSP Power Supply
2. Insert the main board and secure the 8 screws marked below.
80
LITEON Power Supply
Chapter 3