Connecting A Compatible Bluetooth Devoce; Playing Media; Changing The Radio Station; Connecting The Stereo To A Garmin Watch - Fusion MS-RA70 Quick Start Manual

Connecting a Compatible Bluetooth Device
You can play media from a compatible Bluetooth device using the Bluetooth
wireless connection.
1
Select the Bluetooth source.
2
Select 1§1 > DISCOVERABLE to make the stereo visible to your compatible
Bluetooth device.
3
Enable Bluetooth on your compatible Bluetooth device.
4
Bring the compatible Bluetooth device within 10 m (33ft.) of the stereo.
5
On your compatible Bluetooth device, search for Bluetooth devices.
6
On your compatible Bluetooth device, select the stereo from the list of
detected devices.
7
On your compatible Bluetooth device, follow the on-screen instructions to pair
and connect to the discovered stereo.
When pairing, your compatible Bluetooth device may ask you to confirm a
code on the stereo. The stereo does not display a code, but it does connect
correctly when you confirm the message on the Bluetooth device.
8
If your compatible Bluetooth device does not immediately connect to the
stereo, repeat steps 1 through 7.
To prevent interruption to audio streaming over Bluetooth wireless, you can turn
off the DISCOVERABLE setting after pairing a Bluetooth device to the stereo.
Bluetooth Range Information
The stereo and Bluetooth wireless devices have a range of 10 m (33ft.). For
optimal performance, the Bluetooth wireless device should also have a clear line
of sight to the stereo.
Connecting the Stereo to a Garmin® Watch
For more information about the watch, see the watch manual at www.garmin.com
/manuals.
1
Following the instructions in the watch manual, install the FUSION-Link'M app
from the Connect IQ'M store onto the watch.
2
On the stereo, select the BT source.
4
3
Select 1§1 > DISCOVERABLE.
The stereo remains discoverable for two minutes.
4
Bring the watch within 3 m ( 10 ft.) of the stereo.
NOTE: Stay 10m (33ft.) away from other ANT
1
''
devices while pairing.
5
Open the FUSION-Link app on the watch.
The first time you open the app on the watch, the watch automatically pairs
with and connects to the stereo. If you need to pair to another stereo, in the
FUSION-Link app, select Settings
>
Pair new.
6
Control the audio playback using the FUSION-Link app on the watch.
After the devices are paired, they connect automatically when they are turned on,
within range, and the app is open on the watch.
Playing Media
Setting the Tuner Region
You must select the region you are in to receive AM and FM stations properly.
If you are connected to a compatible DAB module and antenna (not included),
you must select the region you are in to receive DAB stations properly.
NOTE: DAB stations are not available in all regions.
1
Select 1§1
>
SETTINGS
>
TUNER REGION.
2
Select the region you are in.
Changing the Radio Station
1
Select an applicable source, such as FM.
2
Select..,. .. repeatedly to move through the tuning modes:
• Select AUTO to scan and stop on the next available station.
• Select MANUAL to select a station manually.
• Select PRESETS to select a saved station preset.
3
Select ......... or..,...,.. to tune to the station.
Manual