It is recommended that a qualified electrician perform this installation. Service and Maintenance For all service and maintenance issues, please contact your local Showline office or an Authorized Service Center. Power Requirements...
Do not connect SL BAR 720ZT to dimmed circuits. Connecting Power Units can be powered in one of two ways: Connecting SL BAR 720ZT Direct connection to a power source using an input cable. For wiring of input connector, refer to...
Mounting Luminaire Truss / Hanging Applications The SL BAR 720ZT is provided with the ability to hang via truss hooks, clamps, etc. sold separately SAFETY CABLE: Is sold separately and recommended for all hanging installation and may be required by national and local codes.
Once digit is set, use LEFT RIGHT arrow buttons to set other digits in address. Step 5. Once all digits are set in address, press (Check Mark) button. Step 6. will display and is saved. SL BAR 720ZT Q UICK TART UIDE...
Page 7
QuickStart Guide RGBW 8 - Bit Mode Table 3 provides DMX channel mapping of all DMX512 control values when the SL BAR 720ZT LED Luminaire is in RGBW 8-Bit DMX512 mode (as set by the luminaire’s menu system). Table 3: SL BAR 720ZT LED Luminaire DMX Channel Mapping (RGBW 8-Bit Mode)
QuickStart Guide SL BAR 720ZT Table 3: SL BAR 720ZT LED Luminaire DMX Channel Mapping (RGBW 8-Bit Mode) Range DMX Range% Parameter Default Description Channel Variable control of zoom Zoom 0-255 0-100% Focus Timing 0-255 0-100% Timing control of Tilt...
Need help?
Do you have a question about the SL BAR 720ZT and is the answer not in the manual?
Questions and answers