3-18. MOTOR ASSY (FRONT PANEL OPEN/CLOSE) (M640)
5 Remove the bracket (motor) assy
in the direction of arrow.
3-19. MAIN BOARD, CHASSIS (B) ASSY
9 Remove a solder of earth wire.
qs main board
1 key connection flexible board
(CN670)
4 ground point screw
8 motor assy (front panel open/close)
4 two screws
(M640)
(PTT2.6 × 6)
6 harness
qa cord (with connector)
(ANT)
0 connector
(CN1)
1 connector
(CN640)
2 ground point screw
7 two screws
(P2 × 2.5)
2 four screws
(PTT2.6 × 6)
8 cord (with connector) (RCA)
7 connector
(CN3)
2 two screws
3 rear panel
5 Remove the main board
from the chassis (B) assy.
6 chassis (B) assy
WX-7700MDX
3 heat sink
(PTT2.6 × 6)
19