Configuring Netware 5; When Using Ips/Spx Protocol; When Using Tcp/Ip Protocol - Panasonic KX-PNBC8 User Manual

7.3 Configuring NetWare 5
NetWare 5 can operate in two modes NetWare Directory Services (NDS).
Proceed to the appropriate section depending on the currently used network protocol.
• Using IPS/SPX protocol
• Using TCP/IP protocol

7.3.1 When using IPS/SPX protocol

Before setting up the server computer and the client computer, the frame type setting
of the Network Card and the server computer need to be the same.
Confirm the frame type displayed on the "NetWare Configuration Menu" of MAP Utility
and the frame type of the server computer.
If the frame types are different, change the server's frame type to the Network Card's
frame type. Refer to the NetWare documentation for more information.
After setting the frame type, select the appropriate mode and set up the printer
settings of the server computer and the client computer.
[1]PServer method ...................................................................section 7.4 on
[2]NDPS method (using PServer method) ......................................................

7.3.2 When using TCP/IP protocol

Select the appropriate mode and set up the printer settings of the server computer
and the client computer.
[1]UNIX method (using LPR method)...............................the NetWare On Line manual
[2]NDPS method (using UNIX method)..........................................................
page 112
page 98
page 109
97