Panasonic KX-PNBC8 User Manual page 19

When Setting by Direct Entering in Step 1
If the administrator manages the IP address, contact your network administrator to
confirm the values of the IP address. If not, set the unique value that is not used for
any other device on the network by referring to When Setting by Direct Entering on
page 17.
The value can be set using the printer LCD panel.
1. Press the MENU/EXIT button.
The printer enters the Menu mode and "Test Page" is displayed.
2. Press the
"Network Protocol setup" is displayed.
3. Press the ENTER button.
"DHCP" is displayed.
4. Press the ENTER button.
The printer enters the DHCP Setting mode.
5. Press the
"Disable" is displayed.
6. Press the ENTER button.
"Ethernet IP Address" is displayed.
Menu Mode
Test Page
button twice (or press the
Menu Mode
Network Protocol setup
Network Protocol setup
DHCP
DHCP
Enable*
button (or the
DHCP
Disable
Network Protocol setup
Ethernet IP Address
button 5 times).
button).
19