Panasonic KX-PNBC8 User Manual page 20

7. Press the ENTER button.
The printer enters the IP Address Input mode.
8. Enter the IP Address.
- Pressing the
(If you keep pressing the button, the value will continue to
increase by ten.)
- Pressing the
(If you keep pressing the button, the value will continue to
decrease by ten.)
9. Press the ENTER button.
The cursor moves to the next 3-digit value.
10. Repeat steps 8 and 9 to finish entering all the 3-digit values of the IP
Address.
A message to confirm the IP Address is displayed.
11. Press the ENTER button.
"Ethernet Subnet Mask" is displayed.
12. Press the ENTER button.
The printer enters the Subnet Mask Input mode.
20
Ethernet IP Address
xxx.xxx.xxx.xxx*
button once will increase the value by one.
button once will decrease the value by one.
Ethernet IP Address
xxx.xxx.xxx.xxx
Ethernet IP Address
xxx.xxx.xxx.xxx
xxx.xxx.xxx.xxx OK?
Yes
Network Protocol setup
Ethernet Subnet Mask
Ethernet Subnet Mask
xxx.xxx.xxx.xxx*