Samsung Bixolon SRP-500 Command Manual page 9

Bit Off/On
0 Off
On
1 -
2 -
3 Off
On
4 Off
On
5 Off
On
6 -
7 Off
On
[Notes]
When both double-height and double-width modes are selected, quadruple size
characters are printed.
Underlining is added to the entire width of each character, including the space to the
right of a character, but is not added to portions of lines that were skipped by means of
an HT.
[Default]
[Reference]
ESC % n
[Name]
[Format]
[Range]
[Description]
[Notes]
When the downloaded character set has been released, the internal character set is
specified automatically.
[Default]
[Reference]
Rev. 1.00
Hex Decimal
00 0
01 1
- -
- -
00 0
08 8
00 0
10 16
00 0
20 32
- -
00 0
80 128
n = 1
ESC E, ESC –
Select/cancel user-defined character set
ASCII ESC
Hex 1B
Decimal 27
0 ≤ n ≤ 255
Selects or cancels the user-defined character set.
When the Least Significant Bit (LSB) is 0, the user-defined character
set is canceled and the internal character set is enabled.
When the LSB is 1, the user-defined character set is selected.
n = 0
ESC &, ESC ?
Character font A (12 x 14) selected.
Character font B (12 x 12) selected.
Undefined.
Undefined.
Emphasized mode not selected.
Emphasized mode selected.
Double-height mode not selected.
Double-height mode selected.
Double-width mode not selected.
Double-width mode selected.
Undefined.
Underline mode not selected.
Underline mode selected.
% n
25 n
37 n
- 9 -
SRP-500
Function