Samsung Bixolon SRP-500 Command Manual page 5

4. Control Commands Details
4-1 Command Notation
[Name] The name of the command.
[Format] The code sequence. ASCII Indicates the ASCII equivalents.
Hex indicates the hexadecimal equivalents.
Decimal indicates the decimal equivalents.
[ ] k indicates the contents of the [ ] should be repeated k times.
[Range] Gives the allowable ranges for the arguments.
[Description] Describes the function of the command.
4-2 Explanation of Terms
LSB Least Significant Bit
4-3 Control Commands Details
HT
[Name]
[Format]
[Description]
[Notes]
This command is ignored unless the next horizontal tab position has been set.
Horizontal tab positions are set with ESC D.
The default tab positions are at intervals of 8 characters (columns 9, 17, 25..) for the
font B (12 x 12).
[Reference]
LF
[Name]
[Format]
[Description]
[Note]
[Reference]
Rev. 1.00
Horizontal tab
ASCII HT
Hex 09
Decimal 10
Moves the print position to the next horizontal tab position.
ESC D
Print and line feed
ASCII LF
Hex 0A
Decimal 10
Prints the data in the print buffer and feeds one line based on the
current line spacing.
This command sets the print position to the beginning of the line.
ESC 2, ESC 3
- 5 -
SRP-500