Samsung Bixolon SRP-500 Command Manual page 14

ESC E n
[Name]
[Format]
[Range]
[Description]
When the LSB of n is 0, emphasized mode is turned off.
When the LSB of n is 1, emphasized mode is turned on.
[Notes]
Only the lowest bit of n is enabled.
The printer does not emphasize bit-images.
This command and ESC ! turn on and off emphasized mode in the same way. The last
proceeded command becomes effective.
Printer output is the same in double-strike (ESC G) and in emphasized.
[Default]
[Reference]
ESC G n
[Name]
[Format]
[Range]
[Description]
When the LSB of n is 0, double-strike mode is turned off.
When the LSB of n is 1, double-strike mode is turned on.
[Notes]
Only the lowest bit of n is enabled.
The printer does not double-strike for bit-images.
Printer output is the same in double-strike and in emphasized (ESC E).
[Default]
[Reference]
ESC J n
[Name]
[Format]
[Description]
[Notes]
After printing is completed, this command sets the print starting position to the
beginning of the line.
This command has no effect on the line feed amount set by the "ESC 2" command or
the "ESC 3" command.
Rev. 1.00
Turn emphasized mode on/off
ASCII ESC
Hex 1B
Decimal 27
32 ≤ n ≤ 255
Turns emphasized mode on or off.
* Printing is slower in emphasized mode.
n = 0
ESC !, ESC G
Turn double-strike mode on/off
ASCII ESC
Hex 1B
Decimal 27
0 ≤ n ≤ 255
Turns double-strike mode on or off.
* Printing is slower in double-strike mode.
n = 0
ESC E
Print and feed paper
ASCII ESC
Hex 1B
Decimal 27
Prints the data in the print buffer and feeds the paper
[ n x 0.122mm {1/192 inches}] .
E n
45 n
69 n
G n
47 n
71 n
J n
4A n
74 n
- 14 -
SRP-500