Jslow1: Slow Mode Booting Jumper - MSI X370 XPOWER GAMING TITANIUM User Manual

To disable GAME BOOST:
1. Set the GAME BOOST knob to HW mode in BIOS Setup.
2. Power off the computer.
3. Rotate the GAME BOOST knob to 0 and then power on. The configuration
parameters will be returned to its default values.
Important
You can also control the GAME BOOST function in BIOS Setup or with MSI
y
COMMAND CENTER software.
In order to optimize performance and improve system stability, when you activate
y
the GAME BOOST function, please leave the settings in the BIOS > OC menu
unchanged.
The success of overclocking depends on the components of your computer.
y
We do not guarantee the GAME BOOST overclocking range or the damages/risks
y
caused by overclocking behavior.
MSI components are recommended for better compatibility when using GAME
y
BOOST function.

JSLOW1: Slow Mode Booting Jumper

This jumper is used for LN2 cooling solution, that provides the extreme overclocking
conditions, to boot at a stable processor frequency and to prevent the system from
crashing. You can connect a button to this jumper, and press the button to enable the
Slow Mode.
Important
Users will try extreme low temperature overclocking at their own risks. The
y
overclocking results will vary according to the CPU version.
Please don' t switch to Enabled when power-off or the system will be un-bootable.
y
Enabled
Normal
(Default) (Please enable this function
during BIOS POST.)
Overview of Components
33