Resound Standard Domes; Resound Tulip Domes - ReSound LiNX3D 67 Quick Manual

Regular care & maintenance
Daily: Clean your hearing aid.
Keep your hearing aids dry. Clean
the hearing aids using a soft cloth
or tissue.
Weekly: Clean the thin tubes and
domes/earmold.
1. Remove thin tubes (F) from hearing
aids before cleaning by unscrewing
them counter clockwise.
2. Wipe down thin tubes and domes (G)
with a soft cloth.
3. In order to clear the thin tube of
moisture and debris, push the black
cleaning rod through the thin tube,
beginning at the end opposite
the dome.
How to apply domes
It is recommended that your hearing care
professional change domes, as incorrect
dome replacement could result in injury.

ReSound standard domes

1. Push the new dome over the receiver.
2. Make sure that the new dome is
properly and securely mounted.

ReSound tulip domes

Tulip domes are mounted in a similar manner to standard domes, but a few extra steps are required. Tulip
domes consist of two "petals". It is important to note that the largest petal is the outermost petal. To ensure
this:
How to apply domes
1. Push the largest petal away from
It is recommended that your hearing care
the receiver tube using a finger. This
professional change domes, as incorrect
bends the petal forward.
dome replacement could result in injury.
2. Then push the largest "petal" back,
and it will be placed on top of the
ReSound standard domes
smaller petal.
1. Push the new dome over the receiver.
2. Make sure that the new dome is
properly and securely mounted.
ReSound tulip domes
Tulip domes are mounted in a similar manner to standard domes, but a few extra steps are required. Tulip
30
domes consist of two "petals". It is important to note that the largest petal is the outermost petal. To ensure
this:
400344011-US-15.04-Rev.B.indd 30
1. Push the largest petal away from
the receiver tube using a finger. This
bends the petal forward.
2. Then push the largest "petal" back,
and it will be placed on top of the
smaller petal.
As needed: Change dome (G)
(if applicable)
ReSound standard domes
1. Push the new dome on to the
thin tube.
2. Make sure that the new dome is
properly and securely maintained.
1
ReSound tulip domes
Tulip domes consist of two "petals". It
is important that the largest petal is
the outermost petal. To ensure this:
1. Push the largest petal away from
1
the thin tube using a finger.
This bends the petal forward.
2. Then push the largest "petal"
back, and it will be placed on top
of the smaller petal.
2
2
20-05-2015 11:48:59