Advertisement
R
epair
< 3 > Assembling shear blade assembly
Spacer
2 Insert spacer between shear blade A and B with aligning its holes with
the same of guide plate.
For easily assembling spacer, it is recommended to insert pan head screws into
the screw holes of guide plate in advance.
3 Turn crank until its position comes to right angle against the joint line of housing R and L, as illustrated in Fig.5.
Otherwise the crank can not engage with the elliptic holes of shear blade A and B.
4 Assemble shear blade assembly to housing by fastening with 6 pan head screws as illustrated in Fig. 6.
Fig. 4
1 Align the holes of shear blade A and B with the same
of guide plate.
Crank
being engaged with elliptic holes
of shear blade A and B.
Bottom view of housing
Fig. 5
Pan head screws
Fig. 6
Shear blade A
Shear blade B
Guide plate
90°
Joint line of housing R and L
Shear blade A and B
P 4 / 7
Shear blade assembly
Advertisement
