Advertisement
R
epair
< 1 > Lubrication
Apply the MAKITA grease N.No.1 to the following parts, when repairing or maintaining.
1 The gear installing portion of motor housing : approx. 6g
2 The teeth of helical gear : approx. 3g
3 Crank : approx. 1g
4 Pin 8 : approx. 1g
< 2 > Disassembling shear blade assembly
1. Unscrew pan head screw M5 x 18, and disassemble under cover by sliding it in the direction of arrow.
as illustrated in Fig. 2.
(Only for the machine for USA. and Canada)
2. Unscrew 6 pan head screws marked with arrow, and disassemble shear blade assembly from motor housing
as illustrated in Fig. 3.
< Note > In case may be, gear assembly 65 can be disassembled together with shear blade assembly in this process.
Be careful, not to give damage on gear assembly 65 by falling it down.
1
Fig. 1
Under cover
Pan head screw M5 x 18
Fig. 2
Pan head screws
Fig. 3
2
3
4
6 arrows are carved also
on the bottom side.
P 3 / 7
Shear blade assembly
Advertisement
