Part Names And Functions - NEC 120Ef User Manual

Part Names and Functions

Figure 1-2: HDD Cage Part Names and Functions
Channel 1 (Port 1) S-ATA Connector
1
S-ATA Connector is to be connected to channel 1 on the S-ATA Disk
Array Controller.
Channel 2 (Port 2) S-ATA Connector
2
S-ATA Connector is to be connected to channel 2 on the S-ATA Disk
Array Controller.
Channel 3 (Port 3) S-ATA Connector
3
S-ATA Connector is to be connected to channel 3 on the S-ATA Disk
Array Controller.
Channel 4 (Port 4) S-ATA Connector
4
S-ATA Connector is to be connected to channel 4 on the S-ATA Disk
Array Controller.
I2C Connector
5
I2C Connector to be connected to the I2C cable.
Power Connectors
6
Power Connectors to which the Base Unit 5VDC and 12VDC power
cords are to be connected.
LED Connector Pins (2)
7
Connector pins control the Disk Access lamp (green) inside the Base
Unit.
7
6
5
4
3
2
1
System Overview 1-3