Table of Contents
Advertisement
Be sure to power off the equipment and unplug its power cords from the wall outlet
before installation/relocation. All voltage is removed only when the power cords
are unplugged.
Turn off your cellular phone or pager when you use the equipment. Their radio
waves may cause the equipment to malfunction.
Do not use damaged power cords. Replace it with a new one of the same type.
In the U.S.A. and Canada, the power cord must be a UL-listed detachable power
cord (in Canada, CSA-certified), type ST or SJT, 16 AWG, 3-conductor, provided
with a molded-on NEMA type 5-15 P plug cap at one end and a molded-on cord
connector body at the other end. The cord length must not exceed 9 feet (2.7
meters).
Outside the U.S.A. and Canada, the plug must be rated for 250 VAC, 10 amp
minimum, and must display an international agency approval marking. The cord
must be suitable for use in the end-user country. Consult your dealer or the local
electrical authorities if you are unsure of the type of power cord to use in your
country. The voltage change occurs via a switch in the power supply.
Using This Guide ix
Advertisement
Table of Contents
