On the target machine, insert the USB disk and reboot the computer.
6.
Boot into DOS using the USB disk.
7.
Execute the batch file. At the command prompt, type UPDATE.bat and press Enter to update
8.
BIOS. Flash process begin.
Flash is complete when the message Flash complete! is shown.The system restarts
automatically when finished.
2-15
Downloaded from
www.Manualslib.com
Figure 2:15. Booting into DOS
Figure 2:16. Updating Flash ROM Blocks (1 of 2)
Figure 2:17. Updating Flash ROM Blocks (2 of 2)
manuals search engine
System Utilities