Table of Contents
Advertisement
Boot Manager
The Boot Manager allows users to select the boot device without accessing the BIOS utility.
NOTE:
Boot Manager is available only if the F12 Boot Menu parameter in Main menu is set to
Enabled (refer to
Perform the following to use the F12 Boot menu:
Start the computer.
1.
When prompted, press the F12 key during POST. The Boot Manager screen appears.
2.
Use the
3.
Press Enter to select and continue with the boot procedure.
4.
System Utilities
Downloaded from
www.Manualslib.com
Main
on page 2-5).
Boot Option Menu
1. Network Boot : BRCM MBA Slot 0200 v15.0.11
2. HDD : XXXXXX
3. ATAPI CDROM : XXXXXX
and to change option, ENTER to select an option
Figure 2:12. Boot Manager Screen
↑
↓
and
keys to highlight a boot device.
manuals search engine
Boot Manager
2-12
Advertisement
Table of Contents
