Document Information; Rs150 Product Overview - Raymarine RS150 Installation Instructions Manual

2.1 Document information

This document contains important information
related to the installation of your Raymarine product.
The document includes information to help you:
• plan your installation and ensure you have all the
necessary equipment;
• install and connect your product as part of a wider
system of connected marine electronics;
• troubleshoot problems and obtain technical
support if required.
This and other Raymarine product documents
are available to download in PDF format from
www.raymarine.com.
Applicable products
This document is applicable to the following products:
Part number Name
E70310
Document illustrations
Your product may differ slightly from that shown
in the illustrations in this document, depending on
product variant and date of manufacture.
All images are provided for illustration purposes only.
Product documentation
The following documentation is applicable to your
product:
Description
RS150 Installation instructions
Installation of a RS150 and connection to a
wider system of marine electronics.
RS150 Mounting template
Mounting diagram for mounting a RS150.
Operation instructions
For detailed operation instructions for your product,
refer to the documentation that accompanies your
display.
10
Description
RS150 SeaTalk ng
GNSS (GPS-
/GLONASS)
Receiver
Part number
87271
87272

2.2 RS150 product overview

The RS150 is a SeaTalk
Satellite Systems (GNSS) Receiver. The RS150
provides position data to devices connected to the
SeaTalk ng© network. When used in conjunction with
a SeaTalk and SeaTalk
also provide position data to SeaTalk devices.
The RS150 has the following features:
• Compatible with GPS and GLONASS GNSS
systems
• BeiDou and Galileo ready (supported by future
software update)
• Pole or surface mountable
• 10Hz refresh rate
• NMEA 2000 compliant
• Low power consumption
• 12 V DC operation (24V protection)
• Waterproof to IPx6
Seatalk ng®
SeaTalk ng (Next Generation) is an enhanced
protocol for connection of compatible marine
instruments and equipment. It replaces the older
SeaTalk and SeaTalk 2
SeaTalk ng utilizes a single backbone to which
compatible instruments connect using a spur. Data
and power are carried within the backbone. Devices
that have a low draw can be powered from the
network, although high current equipment will need
to have a separate power connection.
SeaTalk ng is a proprietary extension to NMEA 2000
and the proven CAN bus technology. Compatible
NMEA 2000 and SeaTalk / SeaTalk
also be connected using the appropriate interfaces
or adaptor cables as required.
ng© Global Navigation
ng© converter the RS150 can
protocols.
2 devices can
RS150 Installation instructions
D13542-1