Connect; Insert The Battery; Battery Level Indication; Connect To Pc - Philips GoGear SA2510 Owner's Manual

3.4 Connect

3.4.1 Insert the battery

1 Remove the USB cap.

3.4.2 Battery level indication

The approximate power levels of your battery are indicated as follows:
Full
Note When the batteries are almost empty, the low battery screen
player saves all settings and unfinished recordings and switches off in less than 60 seconds.

3.4.3 Connect to PC

Use the supplied USB cable to connect the player to the PC.
1 Pull off the USB cap.
2 Connect the supplied USB cable to the USB port at the bottom of the player, the other
end to your PC.
2 Remove the battery door
by sliding it in the
direction of the arrow.
Two-thirds full Half full
3 Insert the supplied AAA
battery into the battery
compartment.
Low
blinks. The
Empty
9