Install software
GoGear Aria comes with the following
software:
Philips Device Manager (helps you get
•
firmware updates for GoGear Aria)
Media Converter for Philips (helps
•
you convert and transfer video files for
GoGear Aria)
Windows Media Player(helps you
•
convert and transfer WMP media files for
GoGear Aria)
Important:
Remember to install the software provided in
the supplied CD-ROM for music and/or video
transfer.
Important: Before installing the software,
check that your computer meets the
requirements (see section System
requirements in this user manual).
1
Connect GoGear Aria to your computer.
2
Insert the CD that comes with the
GoGear Aria into the CD-ROM drive of
your computer.
3
Follow the on-screen instructions to
complete the installation of the software.
If the installation programm fails to start
automatically:
1
Browse the CD contents with Internet
Explorer.
2
Double click on the file ending with '.exe'.
Connect and charge
GoGear Aria has a built-in battery that can be
charged through the USB port of a computer
(USB cable included).
Note
•
For first-time use, allow GoGear Aria to
charge for 3 hours.
•
The charging animation stops and the
icon is displayed when the charging process is
completed.
EN
8
Connect GoGear Aria to a computer
1
Connect the USB plug of the supplied
USB cable to a spare USB port on your
computer.
2
Connect the small USB plug of the USB
cable to the small USB jack on GoGear
Aria.
3
Turn on your computer.
»
GoGear Aria charges.
Battery level indication
The display indicates the approximate levels of
the battery status as follows:
100%
75%
50%
A flashing battery screen indicates that
»
the battery is low. The player saves
all settings and switches off within 60
seconds.
Note
•
Rechargeable batteries have a limited number
of charge cycles. Battery life and number of
charge cycles vary by use and settings.
•
The charging animation stops and the
icon is displayed when the charging process is
completed.
Tip
•
You can conserve battery power and increase
the play time of the GoGear Aria if you go to
> [Display settings] > [Screen off timer]
and ensure that the shortest timer setting is
selected.
25%
0%