Philips SA261/17B Quick Start Manual

SA250_QSG_17 6/23/05 2:50 PM Page 1
Getting started with
GoGear TM Digital Player
Please take some time to read this before using your device.
We hope you enjoy your device.
Product Registration
Since it is possible for you to upgrade your product, we recommend that
you register your product on www.philips.com/register so we can inform you
as soon as new free upgrades become available.
Don't forget about upgrades
We know you will enjoy your product for a long time. For best performance,
we recommend that you regularly check in to www.philips.com/support
for free upgrades of the latest software and firmware for your product.
These downloads will help you to optimize your product's performance and to take
advantage of our future support of new audio formats.
Enjoy your new music experience.
Please read the user manual on the included CD for detailed information.
Overview of controls and connections
1
Charge
1 LINE-IN LINE-IN jack
2 USB cable connector Open the battery compartment. Insert a new battery with
correct polarity.
3 HOLD To disable key press
4 LCD display dynamically displays menu, options and track information
3 4
5 / Scroll; SuperScroll; Skip to previous / next
2 Power on and play
5 / 6 Rewind / Fast forward; Up / Down to 1 level
Press and hold the 2; key to power ON / OFF.
2;
Power on / off and Play / Pause; confirms a menu setting
Basic Operation Controls to press
6 Volume + / - Volume control
3, 4, J( / )K
Scrolling and browsing for up, down, left, right
7 p Headphones jack
)K J(
Go to different levels of menu Press for next and for previous
8 SETTING Settings menu
2;
Play/Pause music Press
9 REC Start or Stop Voice / FM Radio / Line-in recording
Change volume Press VOLUME + / –
0 A - B / DBB A-B Repeat Fast forward/Rewind in a track Press and hold )K / J(
DBB (Enable or disable Dynamic Bass Boost to
Play next or previous track Press 4 for next and 3 for previous
enhance bass tones );
Make recordings Press and hold REC
! Battery door Open to insert battery
Radio mode Select Radio from root menu.
@ Card slot Insert your mini SD card here for memory expansion
Gently push on card to remove Auto tune In radio mode, press SETTING, Select
2;
Autotune. Press to confirm selection.
Manual tune From the radio playscreen, press and hold
)K to entre the manual tune screen.
J( / )K
Press to tune step by step.
For Windows 2000 users
Install
3
Launch Windows Media Player 9 from your Windows desktop.
Insert the included CD into your computer's CDROM drive.
Select your language and follow screen instructions to complete
Send tracks to your player
installation of Windows Media Player (WMP 9 for Windows 2000
or WMP 10 for Windows XP) and Philips Device Manager 1 Click Copy to CD or Device tab.
Use this to troubleshoot your device.
2 In the Items to Copy pane, show the playlist, category, or other item
that you want to copy.
3 Clear the check boxes next to any files you do not want to copy.
4 In the Items on Device pane, show the device that you want to copy files to.
i.e. Philips GoGear.
4
Connect
5 Click the Copy button.
Connect the by-packed adapter to your device and to the main
power supply. Connect the smaller end of your USB cable to your
device, the bigger end to your computer's USB port.
Your device will be recognized as a portable device on your
computer. It is now ready to download music tracks.
Ensure your device is connected before opening WMP for best performance.
5
Transfer
S
Transfer music files from your PC to your Music transferred to removable disk or locations other than
device via Windows Media Player. Philips GoGear as shown in the Items on device pane cannot be
played on your device.
For Windows XP users How do I reset?
Launch Windows Media Player 10 from your Windows desktop.
If such hang-up happens, do not panic. Simply reset your device as follows:
Send tracks to your player
1 Remove the battery.
1 Click Sync tab.
2 Re-insert the battery and power up the device.
2 In the Items to Copy pane, show the playlist, category, or other item that
you want to copy.
3 Clear the check boxes next to any files you do not want to copy. How do I restore / repair my device?
4 In the Items on Device pane, show the device that you want to copy files
With Philips Device Manager you can update the software in your device with a few simple
to. i.e. Philips GoGear.
clicks.
5 Click the Start Sync button.
1 Connect your device to your computer (powered by the supplied AC/DC adapter if
applicable).
Launch Philips Device Manager from Start Program Philips Device Manager.
2 In the main window, select your device and you will be prompted to disconnect your
device from your computer as soon as Device Manager finishes interacting with your
device.
3 Please safely remove your device by clicking from your task tray.
4 Once the USB cable is disconnected, firmware restore/repair will start automatically
in 60 seconds.
Specifications are subject to change without notice.
Trademarks are the property of Ko ninklijke Philips Electronics N.V.
or their respective owners
2005 © Koninklijke Philips Electronics N.V. All rights reserved.
www.philips.com
W