Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Daum electronic ergo_bike medical8
Summary of Contents for Daum electronic ergo_bike medical8
- Page 1 medical Operating Instructions 0650682e.0004 0297...
-
Page 2: Table Of Contents
- Setting Personal Data ................... 8 - Starting Training by Selecting a Program ............. 9 Miscellaneous The ergometer ergo_bike medical8 is designed to apply a defined physical load Data Interface to a test person irrespective (independently) of the pedalling speed. It is very well suited for diagnostic and therapeutic utilisation and for ergometry and rehabilitation. -
Page 3: Safety Notes
The personal computer and all other connected non-medical devices (e.g. monitor, printer, etc) must be installed at least 1.5m away from the patient place, The ergo_bike medical8 carries the CE label CE 0297 according to the council’s because leakage currents could be generated on the housing (or use separate directive for medical products 93/42 EEC and complies with the basic requirements grounding, housing leakage current). -
Page 4: Installation / Update
Installation / Update New installations, updates as well as major interventions on the configuration of the ergo_bike medical8 may only be carried out by authorised personnel. Potential Equalisation Connecting of electronic devices through V 24 / RS232 / USB / LAN, for instance,... -
Page 5: Setting Up
Setting Up Control Elements and Connections 1 Dashboard 2 Interfaces and connectors 3 Handlebars continuously adjustable over 360° 4 Clamp screw for the handlebars 5 Roller casters 6 Name plate 7 Potential equalisation 8 On/Off switch 9 Height adjustment for the saddle 10 Saddle column 11 Horizontal adjustment of the saddle 12 Saddle... -
Page 6: Switching On / Off
The lever should point to the rear after tightening. Pull and turn the lever to point to the rear. - risk of injury. Wireless Pulse rate Measure The ergo_bike medical8 is equipped with a Polar receptor module, and can thus receive coded pulse rate signals only. -
Page 7: The Dashboard
The Dashboard Top panel 1. Colour screen 2. Volume (up) 3. MP3-Player 4. Volume (down) 5. Function keys 6. Menu Calls the main menu 7. Info Displays detailed information about the current situation 8. Control button By turning and pressing this button you can select and open menu items 9. -
Page 8: Dashboard User Guide
Dashboard User Guide Please use the ergo_memo-card2 with every training session to store your Insert the ergo_memo-card2 in the card reader before turning the device on. personal settings and actual training data. This card is user related. It is not possible to store the personal settings of a second user on the same card. -
Page 9: Starting Training By Selecting A Program
Dashboard User Guide Starting Training by Selecting a Program You can choose from various program types. Press control Press control Press the menu button button Training Programs Pulse Rate Training Programs With the pulse rate programs the heart pulse rate is controlled and adjusted automatically by means of the braking power. Press control Press control button... -
Page 10: Setting Limit Values
Dashboard User Guide Strength Training Programs (pedalling speed dependent programs) With the strength programs a pre-selected constant pedalling resistance is applied. The effort produced by the user is a function of the pedalling speed. Press control Press control button button Use the info key to obtain more information about the individual menu items. -
Page 11: Reviewing Stored Training Data
Dashboard User Guide Setting the Static Limit Value for “Time” Turn and Turn and press control press control button to button to Press the select select Menu key “Setting” “Personal data” Turn and Turn and press control Turn and press control press control button to button to... -
Page 12: Mp3 Player
Use the Info key to obtain more information about the individual menu items. Keywords Glossary The ergo_bike medical8 contains a glossary of key words for the concepts related to the utilisation of the dashboard that need a further explanation. A short description is provided for each one of these keywords. -
Page 13: General Notes
220 to 240 Volt will be restricted for all the ergometers of daum electronic supply. If the storage period of the device exceeds this period, it will eventually to the single mains voltage value of 230 Volt. -
Page 14: Ec - Declaration Of Conformity
2. additional form : electromagnetic compatibility - requirements and tests The quality assurance system of daum electronic gmbh is certified by the DQS GmbH according to the representation models ISO 13485:2003 and according to 93/42EEC annexe II item 3, (CE 0297) -
Page 15: Specifications
EC manufacturer's declaration of conformity Safety Requirements daum electronic gmbh hereby declares that this product complies with the following provisions regarding electromagnetic compatibility and electrical safety: - EN 957-5 Additional specific safety requirements and test methods - EC directive 93/42EEC of the council of June 14, 1993 about medical products... -
Page 16: Testing According To The Prescriptions Of The By-Law For Operating Medical Products
Caution! Do not pinch any cable! authorised by daum electronic gmbh according to §6 and §11 of the by-law for Notes about used button cell batteries operating medical products and the known technical regulations, and be repaired - Keep batteries away from children, and do not swallow them! as needed. -
Page 17: Testing /Placing Into Service
Testing /Placing Into Service Reception report Model Serial No. => Note: All the following issues must be considered to complete the reception. Issue Status ISafety notese verified Protected individual electric socket-outlet (16 A) verified Equipotential bonding verified Installation notes / clearance space verified Cable routing verified... -
Page 18: Testing / Placing Into Service
Testing /Placing Into Service Enclosed sheet for the testing (before placing into service) and repeat testing of medical electrical devices or systems according to GEF (German Electrotechnology Federation) 0751-1 Next test date Remark Tester Signature Date Placing into service (start up) -
Page 19: Service Operation
Service Case Any failure of the medical device and the precise description of its cause must be reported to the person in charge of the safety of medical products at daum electronic gmbh. Flugplatzstr. 100 D-90768 Fürth Tel. ++49 (0) 911/9 75 36-0 Fax ++49 (0) 911/9 75 36-96 The device must be tested according to GEF (German Electrotechnology Federation) 0751-1 before it is put back into service. -
Page 20: Gnu General Public License
GNU General Public License 1. Information restricted, and the output from the Program is covered only if its contents constitute a work based on the Program (independent of having been made by Some sections of the software used on your Daum premium 8(i) or medical 8(i) running the Program). - Page 21 GNU General Public License source code for all modules it contains, plus any associated interface definition have the option of following the terms and conditions either of that version or files, plus the scripts used to control compilation and installation of the executable. of any later version published by the Free Software Foundation.
- Page 22 GNU General Public License for details. The hypothetical commands `show w' and `show c' should show the appropriate parts of the General Public License. Of course, the commands you use may be called something other than `show w' and `show c'; they could even be mouse- clicks or menu items--whatever suits your program.
- Page 24 Flugplatzstr. 100 D-90768 Fürth Tel. ++49 (0) 911/9 75 36-0 Fax ++49 (0) 911/75 37-14 www.daum-electronic.de...
Need help?
Do you have a question about the ergo_bike medical8 and is the answer not in the manual?
Questions and answers
Hei! Mistä saan tilattua kuntopyörään varaosia, kun pyörästä puuttuu tällä hetkellä jalkahihnat/-remmit?