Monitor Menu - Asus STRIX H270F GAMING User Manual

USB Configuration
The items in this menu allow you to change the USB-related features.
The USB Devices item shows the auto-detected values. If no USB device is detected, the
item shows None.
Legacy USB Support [Enabled]
[Enabled]
[Disabled]
[Auto]
XHCI Hand-off [Disabled]
[Enabled]
[Disabled]
USB Single Port Control
This item allows you to enable or disable the individual USB ports.
Refer to section 1.1.2 Motherboard layout for the location of the USB ports.
3.7

Monitor menu

The Monitor menu displays the system temperature/power status, and allows you to change
the fan settings.
CPU Temperature, MotherBoard Temperature, PCH
Temperature, T_Sensor Temperature, EXT_Sensor 1/2/3
Temperature [xxx°C/xxx°F] or [Ignore]
The onboard hardware monitor automatically detects and displays the CPU and motherboard
temperatures. Select
CPU Fan Speed, CPU Optional Fan Speed, Chassis Fan 1/2
Speed, Extension Fan 1/2/3 Speed [xxxx RPM] or [Ignore] /
[Monitor]
The onboard hardware monitor automatically detects and displays the CPU, chassis and
extension fan speeds in rotations per minute (RPM). If the fan is not connected to the
motherboard, the field shows N/A. Select [Ignore] if you do not wish to display the detected
speed.
3-26
Your system supports the USB devices in legacy operating systems.
Your USB devices can be used for BIOS setup only and cannot be
recognized in the boot devices list.
Your system automatically detects the presence of USB devices at startup.
If any USB devices are detected, the legacy USB support is enabled.
Enables the support for operating systems without an XHCI hand-off
feature.
Disables the XHCI Hand-off support.
[Ignore] if you do not wish to display the detected temperatures.
Chapter 3: BIOS Setup