HP A-MSR Series Configuration Manual page 14

# Enable IPX.
<RouterB> system-view
[RouterB] ipx enable
# Enable IPX on the interface Ethernet 1/2, with the network ID being 3.
[RouterB] interface ethernet 1/2
[RouterB-Ethernet1/2] ipx network 3
# Set the packet encapsulation format on the Ethernet interface to Ethernet_SNAP.
[RouterB-Ethernet1/2] ipx encapsulation snap
[RouterB-Ethernet1/2] quit
# Enable IPX on the interface Ethernet 1/1, with the network ID being 1001.
[RouterB] interface ethernet 1/1
[RouterB-Ethernet1/1] ipx network 1001
[RouterB-Ethernet1/1] quit
# Configure a Server file service information item.
[RouterB] ipx service 4 server 2.0000-0c91-f61f 451 hop 2
# Configure a Server print service information item.
[RouterB] ipx service 26B tree 2.0000-0c91-f61f 5 hop 2
RIP and SAP are automatically enabled when ipx network is issued on an IPX interface. Therefore, in this
example, no routing protocol is configured.
11