Advertisement
move the raised tone arm to the start of the piece and then move the lift lever
towards the front to lower the tone arm and start playback.
10. To adjust the volume level, turn the volume knob to the right or left.
11. At the end of the record, move the lift lever towards the back to raise the tone
arm and move it back to the tone arm park, and then move the lift lever
towards the front to lower the arm onto its rest.
12. Alternatively, lift the tone arm off the record and return it to the arm rest
manually.
13. When you have finished playing records, engage the tone arm lock to protect
it from accidental movement. Turn the volume knob in a counterclockwise
direction to switch the unit off. Unplug it from the power supply if you are not
going to use it for a while.
NOTE: Should your record stop before the last track finishes, set the auto stop
control to OFF. Your record will now play to the end, but you will have to stop the
turntable rotation manually. (Return the tone arm to its rest manually and if the
turntable is still rotating, switch off the unit by the volume control knob. Then set
the auto stop control back to ON.)
Problems with radio Reception
*Make sure you are in an area that can receive signals for your selected radio
station.
*If AM reception is weak, rotate or reposition the equipment to improve reception.
*If FM reception is weak, try to following to improve reception:
Advertisement
