Table of Contents
Advertisement
NOTE:
WLAN antenna cable labeled "2/AUX" connects to the WLAN module "Aux" terminal.
5.
Lift the module out of the socket (2).
NOTE:
If the WLAN antennas are not connected to the WLAN module, the protective sleeve should be
installed on the antenna connectors, as shown in the following illustration.
Reverse this procedure to install the WLAN module.
30
Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
The WLAN antenna cable labeled "1/MAIN" connects to the WLAN module "Main" terminal. The
Hide quick links:
Advertisement
Table of Contents
