Cisco CVA122 Quick Start User Manual page 7

• Mounted on a wall, using the following instructions:
Choose a location on a suitable wall (wood, cement, or drywall) that is close to the cable TV
–
drop connection and all devices to be connected at the subscriber site.
If also mounting the Uninterruptible Power Supply (UPS) for the Cisco CVA122/122E Cable
–
Voice Adapter, mount it first, using the instructions that accompany the UPS, to ensure that
the wall and location are suitable for both the UPS and the cable voice adapter.
Drill two holes 4-1/8 in. (105 mm) apart, using Figure 5 (not to scale) as a guideline:
–
Figure 5 Wall-Mounting Guidelines
Mounting hole
4-1/8 inch (105mm)
Install two 1/4 in. (6 mm) screws, extending about 1/4 in. (6mm) from the wall. (The anchors
–
or mounting screws should be appropriate for the type of wall being used.)
Mounting hole
7