Cisco CVA122 Quick Start User Manual page 13

Note The USB port on the Cisco CVA122/122E Cable Voice Adapter is between the
Ethernet and telephone connectors, and it is labeled with the USB icon that is shown in
Figure 8:
Figure 8 USB Icon
Verify that the USB Status on the front panel of the Cisco CVA122/122E Cable Voice Adapter
Step 4
turns on. If this LED does not come on, check that each connector on the USB cable is fully
inserted into the USB port on the computer (or USB hub) and the USB port on the
Cisco CVA122/122E Cable Voice Adapter. If you are using a USB hub, verify that it is
properly connected to the computer.
Step 5 The Windows software detects the installation of a new USB device and automatically begins
the software installation process. Proceed to the next section, "Installing the USB Driver for
a Windows PC" for instructions on installing the USB software driver.
13