Cisco CVA122 Quick Start User Manual page 22

4
Configuring the Computer for Ethernet Network Access
If your PC uses an Ethernet card to connect to the Cisco CVA122/122E Cable Voice Adapter, the final
installation step is to modify the TCP/IP configuration for that computer. This procedure is different
for computers running Windows 95/98 and Windows NT/2000.
Note This step does not need to be done for computers using a USB connection, because
installing the USB software driver also installs and configures the TCP/IP software.
TCP/IP Configuration for Windows 95/98
Choose Start>Settings>Control Panel and double-click the Network icon in the Control Panel.
Step 1
Click the Configuration tab in the Network window to display the list of network adapters
Step 2
and other network components.
Select the TCP/IP option that is linked with your Ethernet card and click the Properties
Step 3
button. See Figure 17:
Figure 17 Ethernet Properties Window
22