Makita DF001D Instruction Manual
  1. Manuals
  2. Brands
  3. Makita Manuals
  4. Power Screwdriver
  5. DF001D
  6. Instruction manual

Makita DF001D Instruction Manual

In-line cordless screwdriver
Hide thumbs Also See for DF001D:
1
2
3
4
5
6
7
8
Table of Contents

Advertisement

Quick Links

See also: Instruction Manual
INSTRUCTION MANUAL
In-Line Cordless Screwdriver
DF001D
Read before use.

Advertisement

Table of Contents
loading

Related Manuals for Makita DF001D

Summary of Contents for Makita DF001D

  • Page 1 INSTRUCTION MANUAL In-Line Cordless Screwdriver DF001D Read before use.

  • Page 2: Specifications

    SPECIFICATIONS Model: DF001D Fastening capacities Wood screw ø3.8 mm x 32 mm No load speed (RPM) 220 min Overall length With straight shape 287 mm With pistol shape 205 mm Rated voltage D.C. 3.6 V Net weight 0.36 kg •...
  • Page 3 Keep children and bystanders away while Power tool use and care operating a power tool. Distractions can cause Do not force the power tool. Use the correct you to lose control. power tool for your application. The correct power tool will do the job better and safer at the Electrical Safety rate for which it was designed. Power tool plugs must match the outlet.

  • Page 4: Cordless Screwdriver Safety Warnings

    CAUTION: Use only the Makita AC adapter If electrolyte gets into your eyes, rinse them out and USB cable to charge the tool. Use of the other with clear water and seek medical attention right type AC adapter and USB cable may cause the bat- away.

  • Page 5: Overheat Protection

    To start the tool, simply push the switch on the A side for the clockwise rotation and the B side for the counter- clockwise rotation. Release the switch to stop. CAUTION: Always check the direction of rotation before operation. NOTICE: Change the direction only after the tool comes to a complete stop. Changing the direction of rotation before the tool stops may damage the tool.

  • Page 6: Operation

    OPTIONAL ACCESSORIES CAUTION: These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other Place the point of the driver bit in the screw head and accessories or attachments might present a risk of apply pressure to the tool. Then switch the tool on.
  • Page 8 Makita Europe N.V. Jan-Baptist Vinkstraat 2, 3070 Kortenberg, Belgium Makita Corporation 3-11-8, Sumiyoshi-cho, Anjo, Aichi 446-8502 Japan 885544-225 www.makita.com 20160801...

Table of Contents