Related Manuals for Steinbach SpeedUV 18W
Summary of Contents for Steinbach SpeedUV 18W
- Page 1 SpeedUV 18W UVC Clarifier Instruction UV-System 18W Complete system for installation in Filtersystems Speedclean Comfort 50/75 and Filtersystems DELUXE 10000/8500 Art.Nr. 00-40510 2012_V1 page 1 of 5...
- Page 2 SpeedUV 18W Basic safety precautions are always observed. Errors caused by not following the instructions below could result in serious injury or serious accidents. In this manual, note boxes CAUTION, IMPORTANT, and ADVICE are used, they have the following meaning:...
-
Page 3: General Information
SpeedUV 18W 1 General Information We recommend that you read these instructions carefully before installing the UVC apparatus. This apparatus us- es UV radiation to Sterilize and purify water in pools and ponds. It consists of the following components: 1) Transparent Screw Cap with power cord and ballast... -
Page 4: Safety Instructions
SpeedUV 18W 7 Safety Instructions IMPORTANT The UV system should be installed only according to above installation instruction. The external electrical cable of this apparatus cannot be replaced. If the cable is damaged, the apparatus must be destroyed. Always switch off the unit if there is no water running through it to prevent overheating. -
Page 5: Spare Parts
SpeedUV 18W 3) Obvious abuse or misuse was made 4) The product labeling has been falsified or removed from the pump CAUTION 11 Spare parts 00-40515 UV Bulb 18 Watt 00-40512 Silica glass protective cover length: 16,5 cm 12 Service Processing... - Page 6 Wir senden Ihnen diese gerne kostenlos zu. Dear customer! Instructions in your language are available at www.steinbach.at/manual. In case you do not have internet access, please write us to request the instructions. We will be happy to send you a copy without additional cost.
Need help?
Do you have a question about the SpeedUV 18W and is the answer not in the manual?
Questions and answers