System Settings; Restoring The Default Settings - Verizon V100 User Manual

V100_V100AM / USA EN / A31008-M1908-R301-1-6019 / registr_sett.fm / 12.3.08

System settings

System settings
The system settings are carried out using a
registered Verizon V100H handset.
Protecting against unauthorized
access
Protect the system settings of the base sta-
tion with a PIN known only to you. The
system PIN must be entered when regis-
tering/de-registering a handset with/from
the base station.
Changing the system PIN
You can change the 4-digit system PIN set
on the base station (default setting: 0000)
to a 4-digit PIN known only to you.
Caution:
Do not forget the new system PIN! If you forget
it, you must reset your phone to default set-
tings (see below).
¢
Settings
§Menu§
~
Enter the old PIN and press
.
§OK§
~
Enter the new PIN and press
.
§OK§
~
To confirm, enter the new PIN
again and press
Settings for connecting the base
station to the PABX
The following settings are only needed
when your PABX requires them. Please
refer to the user guide of your PABX.
Changing the dialing mode
The following dialing modes can be
selected:
u
Tone dialing (DTMF)
u
Pulse dialing (DP)
¢
Settings
§Menu§
¢
Mode Tone/Pulse
q
Select dialing mode and press
.
§OK§
26
¢ ¢
System Change PIN
.
§OK§
¢ ¢
System Dialing
Setting the flash time
¢ ¢
Settings System
§Menu§
¢
Short/Long
q
Select flash time
80ms,
Long
press .
§OK§
Switching temporarily to
tone dialing (DTMF)
If your PABX still operates with pulse dial-
ing (DP), but you need tone dialing
(DTMF) for a connection (for example to
listen to the network mailbox), you must
switch to tone dialing for the call.
Requirement: You are conducting a call
or have already dialed an external
number.
¢
Tone Dialing
§Menu§
Press display key to confirm.
§OK§
Tone dialing is now activated for this call
only.
Restoring the default
settings
You can restore the default values for
most settings. When resetting, all hand-
sets remain registered and the directory
will not be deleted.
¢ ¢
Settings System
§Menu§
Press the display key to con-
§OK§
firm reset.
¢
Flash Time
(Short =
= 650ms) and
¢
Reset