Resetting Toner Manually - Brother HL-1110 Service Manual

6. RESETTING TONER MANUALLY

This function allows you to manually perform the same operation as when the toner cartridge
is replaced with a new one. This function provides a method to deactivate the following errors:
when a new toner cartridge cannot be detected, and the toner life cannot be reset.
<Operating Procedure>
(1) Check that the power switch is turned OFF. Press and hold the
the Ready and Error LEDs are lit. Then open the top cover and check that the Error LED
goes out and only the Ready LED is lit.
(2) Take out the drum unit and check that the Error LED is lit. Check that the Ready and
Error LEDs are lit and release the
(3) Set the drum unit and close the top cover.
(4) Press the
(5) Reset the counter by:
Pressing the
Pressing the
button twice. Check that the Error LED is lit.
button five times for the starter toner.
button six times for the standard toner.
button. Check that all LEDs go out.
4-7
button and check that
Confidential